Waterbased PU Adhesive No Hardener Required
Regular waterbased PU adhesive for footwear, when application, need to add 3-5% hardener, cost high and need time and mixing equipment, pot life of adhesive waste after work. How to reduce cost, save more time, save waste adhesive and make pot life very long? YINYANG POLYMER offers the best solution.
Description
Waterbased PU adhesive no hardener required
Regular waterbased PU adhesive for footwear, when application, need to add 3-5% hardener, cost high and need time and mixing equipment, pot life of adhesive waste after work. How to reduce cost, save more time, save waste adhesive and make pot life very long? YINYANG POLYMER offers the best solution.
YF-60
Product description
YF-60 is an aliphatic anionic waterborne polyurethane dispersion suitable for the preparation of heat-activated waterborne adhesives. It has outstanding bonding strength to most natural and synthetic materials and can be used in footwear,shoe making, automotive interiors, woodworking furniture and other application areas. YF-69 has the characteristics of rapid crystallization, good initial adhesion, good hydrolysis resistance and good aging resistance.It can apply without hardener, hardener free type of PU adhesive.
Typical characteristics
|
Property |
Data |
Unit |
|
Appearance |
White milky liquid |
-- |
|
Solid Content |
45~46 |
wt% |
|
Viscosity@25℃ |
<1500 |
mPa·s |
|
pH Activated temperature MFFT |
6-9 50-55 Around 5 |
-- °C °C |
Hot Tags: Waterbased PU Adhesive No Hardener Required, China Waterbased PU Adhesive No Hardener Required manufacturers, suppliers, factory, Eva Sole Primer For Footwear, footwear adhesives and primers, Polyamine Hotmelt Roll For Back Shoe Lasting, Polyester Hotmelt Roll For Fore Shoe Lasting, Pre embeded Hardener Heat Activated In Pu Adhesive, Waterbased Pu Adhesive For Footwear Shoes
